Our knowledgebase contains all the information you need to know about all things SmartBench
| List | Next >
Before you go through this guide ensure you have followed the best practice for accuracy article
SmartBench X and Y planes are illustrated in the image below.
A: X Beam
B: Y Bench
C: Z Head
If you encounter problems with accuracy or squareness in the X & Y plane, you must complete the following item first:
Make sure you are following the best practice for accurate cutting. Click here for the checklist.
This should help you resolve your issue.
However, if you do not see an improvement, it may be that you need to make some mechanical adjustment. The articles in the rest of this section will help you identify your symptom, and then point you towards any necessary adjustments:
Problems with accuracy
Problems with squareness
Problems with circular features not being round
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.