We've made setting your job in the X/Y Datum (job start) as simple as possible by giving visual aids on the console which are relational to the X/Y platform on SmartBench and your job file.
Load your spoil board and work piece
Set and clamp down your work piece and spoil board.
Transfer your job file to the console.
Load your job file on the console
Make sure your job file is orientated correctly to process your job in the right place on your material
Move and set your job file X/Y datum (start) point on SmartBench.
Check your job cut file using the outer file limit bounding box function.
Set your Z Height using the probe plate at the same level you referenced in your CAM file.
That's it job done! All that's left is to press "GO"