Software Update V1.4.3 - Yeti News, Project Features & Developments

Please Wait a Moment
X

Yeti News, Project Features & Developments

Yeti News

Welcome to our news page. If you’re looking for a deeper understanding of our products and how to use them, or if you wanted a ‘behind the scenes’ look at our growing business, then you’ve come to the right place!

Search

Categories

Software Update V1.4.3

Software Update V1.4.3

SmartBench console Software Update
V1.4.3 Release Notes

 

Improvements


User Interface

  • Two extra safety warnings added to the safety screen

chrome_dJtiH2BlNK

  • Reminder for user to reset the Z datum if they have loaded a new file without resetting it.

chrome_3kt6cTddVX

  • Removed FW version popup

chrome_rTXxoAYeSN

  • Added "Console will reboot" popups to network connect and software update sequences

chrome_F0k90emTwu

  • Replaced outdated homing warning screen with popups and standard homing screens

chrome_rON6baUU3o

chrome_9sfZGKPbs8

  • Version refresh in software update app will now pick up tags from a USB stick as well (if one is available)

chrome_fe3CGjajZ9

  • Reinstated Gcode file save into final Shapecutter screen

Bug Fixes

  • Added missing information popups into Shapecutter on datum setting screens

Technical

  • Moved laser off into bootup sequence and set LED to yellow if it is being turned off on startup. Also slight change to order fo bootup sequence.
  • Check for hardware version to use laser commands rather than firmware version (HW v8 instead of FW v1.1.2)
  • Changed the logic around the Door screen, so that it will also resume if the state doesn't start with 'Door'
  • Changed the USB software update logic to be broken down into functions, and get rid of any superfluous commands
  • Changed the repository filenames that the USB software update logic looks for - now looks for both 'easycut-smartbench' and 'SmartBench-SW-update' + version number (or no version number)

 

Related

Tags

Categories

Software Updates

Share