SmartBench has LEDs under the Z head. The different colours indicate what state the machine is in, and whether action needs to be taken by the operator.
< Previous | List |
Green LED status
Green LEDs indicate that the status is good, and that no action needs to be taken.
Yellow LED status
Yellow LED indicates that SmartBench needs to be homed.
Orange LED status
Orange LEDs indicate that the homing process is underway.
White LED status
The LED is white when the user is manually moving SmartBench in the Z axis, or setting the Z datum using the probe plate.
White LEDs will also show during alarms.
Red LED status
Red LEDs indicate that there has been a problem, and the operator needs to take action to resume SmartBench.
The red LEDs may be static or flashing:
|
|
The LEDs will not reset to green until the job has finished or been cancelled.
|
Blue LED and laser crosshair
The Blue LED and laser crosshair will show when you are using the console to carry out manual moves, so that you can easily and accurately position the XY datum.
You will need to set up the laser offset in order to use the crosshair to set datums.
Click here to learn more about calibrating the laser offset.
< Previous | List |