1. Follow the video instruction to check if you need to adjust your axis wheel seetings

2. If wheel adjustments are made follow the calibration proceedure below

1. Follow the video instruction to make sure the X and Y axis are square after 320 hours of operation or after replacing or using a different or new Lower X Beam.

2. If wheel adjustments are made to square the axis follow the calibration proceedure below

1. Download this step by step guide and follow the video instruction to check if you need to adjust your axis wheel seetings

2. If wheel adjustments are made follow the calibration proceedure below

Calibrating you SmartBench is a critical factor in maintaining cutting accuracy and performance.

Calibrating will be necessary in the following situations:

Significant changes in temperature

The fitting of warranty replacements

Excessive vibrations in transit

Regular maintenance checks (every 320hrs of use)

SmartBench now comes with a calibration wizard, which should make calibrating quick and easy.

See our walkthrough video below for your step by step guide!