Our knowledgebase contains all the information you need to know about all things SmartBench
Updating Your Software Software updates are not available offline, so please ensure you are connected to wifi. Refer to your quick start guide if you require instructions.
To tell you are connected, you will see a unique IP address in the bottom left hand corner of your screen.
Step 1: Tap the settings icon
Step 2: Select the Settings tab to the far right of your screen.
Step 3: Select Get software updates
Step 4: Your console will update & reboot. It is important that you do not manually turn SmartBench off until the reboot has completed.
Step 5: You can check your software has been updated by going to settings and finding your version number.
If your software does not update after following these steps, you may need to perform a manual repair & update. Find out how to do this in this article: https://www.yetitool.com/support/knowledge-base/support-technical-bulletins-how-to-perform-a-manual-software-update
Lettie Adkins is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.