Our knowledgebase contains all the information you need to know about all things SmartBench
< Previous | List | Next >
You will need an MDF or plywood spoilboard. It needs to be rigid and flat so that SmartBench can clamp it, and run across it easily.
We recommend using a 6mm - 9mm melamine-faced MDF board.
You will need an extraction system, which you should choose with your specific application in mind.
Click here to see our extractors in a new window.
You will need good cutters and collets, and lots of them!
Click here to see our range of cutters in a new window.
You will need a CAD/CAM software package, such as Vectric VCarve Pro or Autodesk Fusion 360.
Click here to see our software packages in a new window.
Rami is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.