Merry Christmas everybody!
In this video we make three different bauble designs from three different materials: MDF, Alusplash, and Mirostone!
If you’d like to make one yourself, simply follow along with this video, and see the links below for everything you will need.
Here’s where to find the SVG/DXF/CRV file: https://drive.google.com/drive/folder...
Here’s the tools and materials required:
Alusplash MDF Mirostone
1x 60 degree tct v groove router cutter bit
1x 3.175 solid carbide 2 flute up down compression router bit
1x 6mm solid carbide 2 flute spiral flute up cut router bit
1 x 8mm solid carbide 2 flute spiral flute up cut router bit
1x Super glue & activator
Screws
Masking tape
Ribbon Drill & Countersink bit
Want to see how Marty made the file on Vectric? Check out this full video tutorial here: VCarve Tutorial |...
If you end up making your own, show us by tagging us on social media (@yetitool).