Live Knowledgebase > SmartBench > Extra features > PrecisionPro: Laser datum > Setting the XY Datum with either the laser crosshair or tool centre

Please Wait a Moment
X

Knowledge Base

Our knowledgebase contains all the information you need to know about all things SmartBench

 

Setting the XY Datum with either the laser crosshair or tool centre

You can still use the tool to set the XY datum when the laser datum is enabled. This article will show you how to set the datum with the laser crosshair or the tool.

< Previous | List | Next >

When setting the XY datum with the laser enabled, you will always be asked whether you are setting the datum with the laser crosshair OR with the centre of the tool. 

The prompt will come up automatically whenever you press any of the “SET” buttons on the console. 

Setting using the crosshair

To set the XY datum using the laser crosshair, you will need to ensure that the “Use laser datum?” box is checked when you confirm the position of your datum. 

When you set the datum, SmartBench will move the tool back over the target, ready to begin the job. 

Setting using the tool

To set the XY datum using the tool, you can just uncheck the “Use laser datum?” box, and then select “Yes”. 


< Previous | List | Next >

If this article didn't solve your problem, please submit a support ticket here

Rami

Rami is the author of this solution

Glad we could be helpful. Thanks for the feedback.

Sorry we couldn't be helpful. Your feedback will help us improve this article.

Did you find it helpful?

Yes   No
Updated on Wed, 25 Aug 2021