Our knowledgebase contains all the information you need to know about all things SmartBench
< Previous | List | >
Finally you will need to earth the extraction hose on both ends. To do this, secure it onto the Z Head bottom plate with the supplied M4x6 cap head, using a 3mm hex driver.
This is how the earthing cable should be secured to the Z Head.
It is important to also earth the extraction hose on the extraction end, which prevents build-up of static electricity which can cause mid-job interruptions.
We supply an earth cable on the end of the extraction hose. Please refer to your specific extraction system setup for the best location to attach the earthing cable to.
Kieran Buchan is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.