Our knowledgebase contains all the information you need to know about all things SmartBench
< Previous | List | Next >
If you have a PrecisionPro or PrecisionPro +, then you can skip onwards to step 2 (below)
Begin by removing the 2 bolts from the back of your Z Head cover plate using a 3mm hex driver.
Take care to ensure the spacers stay in place.
To begin, line up the holes on the hose holder, with the holes on the top plate of the Z-head. Thread the supplied M5x45 Bolts (these will be longer) through the aligned holes and remaining spacers, and tighten using your 3mm hex driver
Kieran Buchan is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.