This article explains how to start a job on SmartBench.
< Previous | List | Next >
As a final check, let’s just check that our spindle and vacuum are operational by using the buttons on the manual move screen.
Right now we’re ready to go.
Once all preparations are done, we can start our job.
Press the green play button on the far right of the console, and follow the on screen instructions.
You will be asked if you are using a Stylus or the router, in this instance we are using the router.
When you are asked whether the Z head should raise on a job pause, select “Yes”.
Read and accept the safety warning screen.
And finally, press the GO button.
Click here to learn more about starting a job.
< Previous | List | Next >