Our knowledgebase contains all the information you need to know about all things SmartBench
Part number
Part description
20794
SC1 V1 120v
20795
SC1 V1 230v
21365
SC2 V1 120v
21366
SC2 V1 230v
21676
SC1 V2 120v
21677
SC1 V2 230v
21678
SC2 V2 120v
21679
SC2 V2 230v
20898
Spindle data cable V1.0
21563
Spindle data cable V1.1 w/ Springs
21623
Spindle data cable V1.2
21663
Spindle data cable V2.0
Firstly, check the label on the side of your spindle motor for the following:
Type
Voltage
Art Nr
You can also determine which type of spindle motor you have by inspecting the PCB.
Directions for removing the rear PCB cover can be found here
The type of PCB socket determines if a spindle motor is V1 or V2.
Spindle PCB version can be determined by the part number on the label.
The data cable enables communication between SmartBench and the Spindle Motor. Depending on the motor, this can include:
SC0
SC1
SC2
To spindle
From spindle
No spindle data cable functionality
Target spindle speed (RPM)
Overload feedback
Protocol commands (reset brush time etc.)
Actual spindle speed (RPM
Spindle temperature
Spindle load
Spindle brush time
Spindle total use time
Spindle Unique ID
Spindle Model
Data cable version
V1.0
V1.1
V1.2
V2.0
SC1-V1.0 (120V / 230V)
SC2-V1.0 (120V / 230V)
SC1-V2.0 (120V / 230V)
SC2-V2.0 (120V / 230V)
If you are unsure about version compatibility, then please submit a support ticket here
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.