Our knowledgebase contains all the information you need to know about all things SmartBench
Remove the Z-Head from Smartbench before this installation and preparation
Ensure you have enough safe space to work on your Z-Head before beginning. Place your Z-Head on the side as below:
3mm driver
4mm driver
With a 3mm driver remove 2 bolts holding on the extraction elbow and the o-ring
Move the existing dust shoe cable to above the bottom Z-Head plate. Use the included Zip Tie if required to secure it in place.
Ready to install the BigFoot Upgrade!!
Any questions, issues or suggestions contact us via a support ticket.
Keep your old dust shoe safe just in case you would like to reinstall it in the future
Elliot. is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.