Our knowledgebase contains all the information you need to know about all things SmartBench
< Previous | List | Next >
Before reading this article, it is essential to run through the best practice for accurate cutting checklist. Click here to read the checklist.
If the issue persists, answer the following questions in this article, before proceeding to the next article.
A: Too long
B: Target
C: Too short
D: Stock material
If your SmartBench shows this symptom then you will need to:
Service your Lower X Beam wheels and pinions, click here to learn how to set wheels and click here for pinion checks
E: Spoilboard
F: Stock material
G: Cut too short
H: Target cut
I: Cut too long
Service your Z Head wheels and pinions, click here to learn more about setting wheels and click here for pinion checks
LozProcter is the author of this solution
Glad we could be helpful. Thanks for the feedback.
Sorry we couldn't be helpful. Your feedback will help us improve this article.